A-A-55748
the sensing element by the deposition and accumulation of spray materials.
In the case of diaphragm type, the inlet port shall have an easily removable
filter assembly, or other means to prevent the entry of suspended material.
The dial cover shall be shatterproof and moisture-proof and permit easy
reading of the tank pressure.
3.16.12 Foot-rest. A foot-rest designed to steady the apparatus while it
is pumped. It shall be attached to the bottom part of the tank and shall be
hinged to fold up against the tank side and remain there until required.
3.16.13 Inspect ion light.
A spray inspection light. It shall be attached
to the lance and be constructed from brass, aluminum or plastic.
3.16.14
A crack and crevice nozzle tip
assembly. Component; shall be made of stainless steel, ceramic or a suitable
nonferrous material.
Unless otherwise specified (see 7.2.13), the
3.16.15 Treatment and fresh
sprayer shall be treated and finished in accordance with the quality practiced
by the manufacturer to obtain treatment and finish of equivalent commercial
units.
3.17 Identification ma rking.
The sprayer shall be marked in a
3.17.1 Civil identification marking.
permanent and legible manner with the manufacturer's name or with a trademark
of such known character that the source of manufacture may be readily
determined.
The sprayer shall be identified in
3.17.2 Military identification marking.
accordance with MIL-STD-130.
hip. All parts, components, and assemblies of the sprayer shall
be clean and free from harmful extraneous material such as sand, dirt, fins,
pits, scale, and rust, and shall also be free from burrs and sharp edges or
projections or other defects that could impair its performance or service-
ability.
3.19 Operator's manual.
The manufacturer's standard instruction manual with
parts lists shall be provided with each sprayer.
4. REGULATORY REQUIREMENTS.
4.1 Recovered materials The offeror/contractor is encouraged to use
recovered materials to the maximum extent practicable, in accordance with
paragraph 23.403 of the Federal Acquisition Regulation (FAR).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business